ITnovo

ITnovo product specially formulated for treating minor damages on the surface of hardwood floors Listone Giordano ; in Invisible Touch finish. Thanks to the products Care the correct cleaning of a hardwood floor is remarkably simple.

Restores the uniform appearance of the floor’s surface on stains and marks; also protects the surface on the scratches that remove the finish.

Directions for use to restore stains and marks

• Using a sandpaper with a grit of 150/180, sand the surface area only where the stain is found, working in a direction always parallel to the length of the floorboards in order to remove the stain (step 1).
• Vacuum clean or remove with a small paint-brush the sawdust (step 2).
• After sanding the wood will appear as in the picture step 3.

• Sand slightly with a grit of 240 the surface in the area where the stain has been removed in a direction always parallel to the length of the floorboards in order to improve the adhesion of ITnovo Listone Giordano® to the wood surface (step 4).
• Vacuum clean or remove with a small paint-brush the sawdust (step 5).

• Shake well the bottle of ITnovo Listone Giordano®.
• Apply it with a small flat paintbrush with soft bristles on the area just sanded covering well the central part and softening the product on the contour of this area (step 6).
• Immediately after the application of ITnovo Listone Giordano® the wood will appear “soaked” as in the picture step 7.
• Wait 1 hour for the product to dry up.
• Apply again ITnovo Listone Giordano® according to the directions before (step 6).
• On the treated area the wood could show a slightly different brightness, particularly evident looking the floor against the light.
• Wait at least 1 hour for the product to dry up before walking on the floor.
• Wait at least 24 hours before washing the floor with Green Listone Giordano®.

Directions for use to protect the wood in case of scratches

• Shake well the bottle of ITnovo Listone Giordano®.
• Apply it with a small round paintbrush with soft bristles directly onto the scratch, in order to protect the wood avoiding to pass outside the area of the scratch.
• Clean immediately the product applied outside the scratch surface with a soft cloth soaked with water.
• Wait at least 1 hour for the product to dry up before walking on the floor.
• Wait at least 24 hours before washing the floor with Green Listone Giordano®.

Warnings

While this product is not classified as dangerous or flammable, keep out of the reach of children. The information contained on this sheet are based on the company's research and experience. However it is intended for general purposes only since it is impossible to predict every environmental and installation variable.